Microfinish Comparators

Microfinish Comparators  

We produce a complete product line of Microfinish Comparators that are used to verify surface roughness for a variety of manufacturing processes.

C-9 Cast Microfinish Comparator C-9 Cast Microfinish Comparator

C-9 Cast Microfinish Comparator

$80.00

Cast Microfinish Comparator: Nine replicated cast surface finish specimens ranging from 20 to 900 microinches. The C-9 Cast MICROFINISH COMPARATOR Surface Roughness Scale is made by a dual electrofor...

E-9   Electrical Discharge Machined Microfinish Comparator (EDM) E-9   Electrical Discharge Machined Microfinish Comparator (EDM)

E-9 Electrical Discharge Machined Microfinish Comparator (EDM)

$51.00

Electrical Discharge Machined Microfinish Comparator (EDM): Nine replicated EDM surface finish specimens ranging from 16 to 250 microinches.The E-9 MICROFINISH COMPARATOR Surface Roughness Scale provi...

G-4 Kit Gar Pak Kit G-4 Kit Gar Pak Kit

G-4 Kit Gar Pak Kit

$204.00

Contains four individual roughness scales that include replicated surface finish specimens of machined (S-22), grit-blasted (G-6), shot-blasted (SH-6) and electrical discharge machined (EDM) (E-9) sur...

G-6 Grit-Blast Microfinish Comparator G-6 Grit-Blast Microfinish Comparator

G-6 Grit-Blast Microfinish Comparator

$51.00

Six replicated grit-blasted surface finish specimens ranging from 32 to 1000 microinches.The G-6 MICROFINISH COMPARATOR Surface Roughness Scale is made by a dual electroforming process wherein nickel ...

G-60 Conventional Machining Microfinish Comparator G-60 Conventional Machining Microfinish Comparator

G-60 Conventional Machining Microfinish Comparator

$80.00

Twelve replicated machined surface finish specimens with examples of five different machining processes: lapped, ground, profiled, shape-turned and milled- ranging from 4 to 125 microinches. The G-60...

G-61 Conventional Machining Microfinish Comparator G-61 Conventional Machining Microfinish Comparator

G-61 Conventional Machining Microfinish Comparator

$80.00

Twelve replicated machined surface finish specimens with examples of four different machining processes: Shape-turn, ground, profiled and milled- ranging from 250 to 2000 microinches. The G-61 MICROF...

G-62 Cylindrical Ground Microfinish Comparator G-62 Cylindrical Ground Microfinish Comparator

G-62 Cylindrical Ground Microfinish Comparator

$80.00

Ten replicated ground surface finish specimens: Five shown as inside  diameter (I.D.) and five shown as outside diameter (O.D.)- both with range of 4 to 63 microinches.The G-62 MICROFINISH COMPAR...

G-63 Cylindrical Turned Microfinish Comparator G-63 Cylindrical Turned Microfinish Comparator

G-63 Cylindrical Turned Microfinish Comparator

$80.00

Ten replicated turn surface finish specimens: Five shown as inside  diameter (I.D.) and five shown as outside diameter (O.D.)- both with a range of 16 to 250 microinches. The G-63 MICROFINISH CO...

M-102 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator M-102 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

M-102 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

$44.00

Individual rectangular block (measuring 1 3/8" x 1 7/8"). It is made of corrosion resistant electroformed nickel that is a duplicate of actual conventionally machined surfaces.This MICROFINISH COMPARA...

M-104 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator M-104 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

M-104 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

$44.00

Individual rectangular block (measuring 1 3/8" x 1 7/8"). It is made of corrosion resistant electroformed nickel that is a duplicate of actual conventionally machined surfaces. This MICROFINISH COMPAR...

M-108 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator M-108 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

M-108 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

$44.00

Individual rectangular block (measuring 1 3/8" x 1 7/8"). It is made of corrosion resistant electroformed nickel that is a duplicate of actual conventionally machined surfaces.This MICROFINISH COMPARA...

M-116 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator M-116 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

M-116 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

$33.00

Individual rectangular block (measuring 1 3/8" x 1 7/8"). It is made of corrosion resistant electroformed nickel that is a duplicate of actual conventionally machined surfaces.This MICROFINISH COMPARA...

M-132 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator M-132 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

M-132 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

$33.00

Individual rectangular block (measuring 1 3/8" x 1 7/8"). It is made of corrosion resistant electroformed nickel that is a duplicate of actual conventionally machined surfaces.This MICROFINISH COMPARA...

M-15 Master Visual-Tactual Set M-15 Master Visual-Tactual Set

M-15 Master Visual-Tactual Set

$273.00

Master Visual-Tactual Set: Eight individual blocks with fifteen replicated machined surface finish specimens ranging from 2 to 125 microinches.The M-15 Master Set contains eight individual rectangular...

M-163 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator M-163 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

M-163 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

$33.00

Individual rectangular block (measuring 1 3/8" x 1 7/8"). It is made of corrosion resistant electroformed nickel that is a duplicate of actual conventionally machined surfaces.This MICROFINISH COMPARA...

M-190 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator M-190 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

M-190 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

$33.00

Individual rectangular block (measuring 1 3/8" x 1 7/8"). It is made of corrosion resistant electroformed nickel that is a duplicate of actual conventionally machined surfaces. This MICROFINISH COMPAR...

M-225 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator M-225 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

M-225 Master Visual-Tactual Individual Block Conventional Machining Microfinish Comparator

$33.00

Individual rectangular block (measuring 1 3/8" x 1 7/8"). It is made of corrosion resistant electroformed nickel that is a duplicate of actual conventionally machined surfaces.This MICROFINISH COMPARA...

Precision Reference Standard Precision Reference Standard

Precision Reference Standard

$176.00

The GAR Precision Reference Standard shows actual patch mean values certified by the National Institute of Standards and Technology.An economical calibration standard for surface analyzing equipment....

S-22 Conventional Machining Microfinish Comparator S-22 Conventional Machining Microfinish Comparator

S-22 Conventional Machining Microfinish Comparator

$74.00

Twenty-two replicated machined surface finish specimens with examples of six different machining processes: lapped, ground, blanchard ground, shape-turned, milled and profiled- ranging from 2 to 500 m...

SH-6  Shot-Blast Microfinish Comparator SH-6  Shot-Blast Microfinish Comparator

SH-6 Shot-Blast Microfinish Comparator

$51.00

Six replicated shot-blasted surface finish specimens ranging from 32 to 1000 microinches. The SH-6 MICROFINISH COMPARATOR Surface Roughness Scale is made by a dual electroforming process wherein nick...

15950 Portable Surface-Roughness Tester

15950 Portable Surface-Roughness Tester

$1,995.00

A Precision, Fully Self-Contained Compact Tester Incorporating An Advanced Microprocessor. Performs data aquisition, data processing and display of all test measurements.The Model No. 15950 Portable S...

15951 REPLACEMENT STYLUS FOR MODEL NO. 15950

15951 REPLACEMENT STYLUS FOR MODEL NO. 15950

$295.00

A Precision, Fully Self-Contained Compact Tester Incorporating An Advanced Microprocessor. Performs data acquisition, data processing and display of all test measurements.The Model No. 15950 Portable ...

16008 Surface Roughness Standards Set 16008 Surface Roughness Standards Set

16008 Surface Roughness Standards Set

$115.00

Ideal for use in drafting room, engineering department or in the small shop. This set has 30 specimens, each are 7/8" x 3/8" comprising: 3 Specimens Flat Lapping:  2,4 and 8ยต" AA3 Specimens ...

16009 Surface Grinding Comparator 16009 Surface Grinding Comparator

16009 Surface Grinding Comparator

$94.00

The largest variety of standards available for assessing and specifying, by symbol, the degree of roughness of machined parts - including every machining method known.Every Obtainable Value15 differen...

16010 Cylindrical Grinding Comparator 16010 Cylindrical Grinding Comparator

16010 Cylindrical Grinding Comparator

$94.00

Surface Roughness (texture) comparison standards. Made of solid electroformed nickel.The largest variety of standards available for assessing and specifying, by symbol, the degree of roughness of mach...